This page is organized by live Amazon price, which means it changes. Everything below was under $400 at the last price check shown above each buy button. If a listing has moved since, the number you see is the current one, not the one we wrote about.
What changes between $500 and $400
Two specific things, and they are worth knowing before you decide whether to stretch.
The five-liter basket goes. At just under $500 the Beatbot Sora 10 publishes a 5 L basket, which is the largest at any budget price and the best single predictor of how a machine handles leaf load. Nothing under $400 matches it.
Published fine filtration goes. The WYBOT C2 publishes a 10-micron layer just under $500. Below $400 no robot on this site publishes a fine micron figure at all. If your problem is sand, silt, pollen or dead algae after a treatment, that is the line you should not cross — the under $500 page is the right page for you, and the sand and silt roundup explains why micron rating decides it.
What you keep under $400 is substantial: a 160-minute runtime, app control, wall climbing, and a choice of format that the $500 tier does not really offer.
The real question at this price: which format
Above $500 almost every sensible answer is a cordless floor robot. Under $400 the money buys a genuinely good example of four different kinds of machine, and the right one depends entirely on what is annoying you.
- The floor is dirty — a cordless robot. The WYBOT C1.
- The walls are dirty too — a climber. The Aiper Seagull Pro.
- Leaves land and sink — a surface skimmer, which stops them sinking in the first place. The Beatbot iSkim.
- You want nothing that can run out of battery — a suction cleaner. The Zodiac MX6.
- One stubborn patch your robot misses — a handheld. The Pool Blaster Max CG.
Which one, and what it costs you
WYBOT C1 — the all-rounder
160 minutes, app control, and rated for both inground and above-ground pools. The most capable cordless robot on this site under $450 and the one most people at this budget should buy. Good to know: no published micron rating and no waterline pass, so if the grease line is your complaint this is not the machine.
Aiper Seagull Pro — when the walls matter
Four motors, a genuine wall climb and 150 minutes, just under $400. Climbing is the thing you are paying for here and most cheaper machines do not do it. Good to know: climbing and a waterline pass are different jobs — this reaches the line and does not scrub it.
Beatbot iSkim — if leaves are the problem
A 9-liter basket, more than twice any other solar skimmer here, working the surface all day at no running cost. The counter-intuitive pick: debris caught floating never sinks, never stains your floor and never loads your filter, so for a pool under trees this often beats spending the same money on a floor robot. Good to know: surface only, and solar output drops under the same heavy tree cover that creates the leaf problem. The skimmer roundup compares all of them.
Zodiac MX6 — nothing to charge
Cyclonic suction and X-Trax treads, powered by the pump you already own. No battery to age, no electronics to fail. Good to know: everything it collects goes into your pump basket and filter, and it adds pump hours — the suction roundup works through those running costs.
Pool Blaster Max CG — the spot tool
A 12.75-inch cordless hand vacuum, no hose and no pump involvement, for the patch of sand in the corner your robot keeps driving past. Good to know: it is a handheld, so you are the one in the pool doing the work. It complements a robot rather than replacing one.
Aiper Scuba SE — the budget pick
The cheapest machine here that is still a robot: 90 minutes, 860 sq ft, floor only. Exactly right for a 15-24 ft above-ground pool and wrong for anything bigger, which is the whole of the advice. Good to know: 180-micron filtration is coarse, so fine silt passes through it.
The one spec not to compromise on
Rated pool area. Every other compromise on this page survives contact with reality — a coarse filter still catches leaves, a floor-only robot still cleans the floor, a handheld still works. But a machine rated for 860 sq ft in a 1,600 sq ft pool never finishes a cycle, and the part it never reaches is the same part every time. Measure your pool, then buy at or above that figure.
What to avoid under $400
- Unbranded listings with no published specs. No rated area, no runtime, no filter rating means you cannot size it to your pool and cannot buy parts for it later. Every machine here publishes at least two of the three.
- A robot with no replacement battery available. At this price the pack is a large share of the machine’s value, and a robot you cannot re-pack is a three-season purchase. Check the battery page before committing.
- Buying a floor robot for a floating-debris problem. The most common mismatch in the whole category, and the cheapest one to avoid.
- Judging a steep discount on its list price. Several listings here show large percentages off. Judge them on the live price, which is the number above each button.